Announcement

Collapse
No announcement yet.

New pot stove

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Kinguq
    replied
    Undersky, interesting. The other issue with this stove is that the door is curved, so it would require some design work. Also I am not sure how it would interact with the baffle outlet, which is abve the door.

    Kinguq.

    Leave a comment:


  • Undersky
    replied
    Go for it, Kinguq! I have found that adding fresh air intake immediately above the isinglass, keeping that draft fairly wide open, and keeping the burning wood 8 cm (3 inches) away from the glass will allow many hours of beautiful gazing between cleanings.

    Leave a comment:


  • Kinguq
    replied
    I have considered a transparent door, but I am guessing it would smoke up rapidly and require frequent cleaning. Would be nice!

    Kinguq.

    Leave a comment:


  • Undersky
    replied
    Kinguq, thank you for persevering with the picture posting.
    I really appreciate pictures.
    Your set-up looks great!
    Love your stove build.
    I agree that many of Chimpac's ideas are excellent.
    Such an effective, but still relatively simple DIY!
    Looks like it would be fairly easy to make a second door option with a mica window. You could swap-out the original door for the window door when you were kicking back and wanted to enjoy looking at the flames.

    Leave a comment:


  • Kinguq
    replied
    Went on a canoe trip with this stove and it is very good. Throws plenty of heat, hot cooking surface and is a real wood mizer.



    Also I am using a vinyl door that attaches with velcro tabs. At this time of year one spends a lot of time in the tent so it is nice to have a view.



    Kinguq

    Leave a comment:


  • Justin P.
    replied
    I like that design a lot!
    Old water bath canners and enamel stock pots pop up in thrift stores from time to time.
    I see cheap stainless stock pots around occasionally too, those would make a good donor for one of these stoves too.

    Leave a comment:


  • Kinguq
    replied
    Yay! I fixed the photos!

    Kinguq.

    Leave a comment:


  • Heavy Duty
    replied
    I cannot see the images either, it's saying invalid image file. perhaps were they copies from Facebook? If so, that may be the issue. I'll try to repair the post.

    Leave a comment:


  • Kinguq
    replied
    Thanks Snowbound. I remember seeing your stove on the old WT site. Yes I really like this style of stove. This is the first one I have made with a vertical sliding door and that is a real winner. Chimpac had some great stove ideas but his stove is beyond my ability to make.

    Cheers,
    Kinguq.

    Leave a comment:


  • Snowbound
    replied
    Thanks for taking the time to post. Sorry the photos didn’t work. I’m a fan of this kind of stove. I think many others would be too if they had a chance to try one. It’s a super efficient design. I’ve made one out of 10” round duct work. I’ll have to do a write-up some day.

    Leave a comment:


  • Kinguq
    replied
    Well I am baffled then. I followed the instructions and it took some time to upload the photos, which apparently no one but me can see. Sorry about that but I don't have any more patience to expend on this. If anyone is interested, I posted some photos to a FaceBook group. https://www.facebook.com/groups/2341...66916463741579

    Kinguq.
    Last edited by Kinguq; 10-17-2020, 04:33 PM.

    Leave a comment:


  • Smoked in Space
    replied
    Unless you posted pictures of a blizzard, I can’t see them either.

    Leave a comment:


  • Kinguq
    replied
    Hi, no clue. They show up fine for me. Perhaps the administrator can help out.

    Edit: does anyone see the photos??

    Kinguq.
    Last edited by Kinguq; 10-17-2020, 01:09 PM.

    Leave a comment:


  • Moondog55
    replied
    Why can't I see any pictures?

    Leave a comment:


  • Kinguq
    started a topic New pot stove

    New pot stove

    I needed a new stove for my solo rig, so I decided to make another pot stove. I made one about 10 years ago, documented on the lamented WinterTrekking site, but that one is made from a 25 L pot and I needed a smaller one. The original pot stove has been great: lots of heat output, especially since I added a baffle, no rust and no warping.

    Started with this: a 6.8 L black enamel steel canning pot with a domed lid. The lid will form the bottom of the stove.



    Hole cut and 3" chimney port riveted in. I am using 3" galvanized duct, available at any building store, as chimney.



    Pattern for the baffle. The shape is complex because the baffle needs a step to fit the chimney port. The baffle is about 5 cm beneath the top of the stove, but the chimney port is close to 8 cm, requiring more space.



    Finished baffle with tabs bent in. This is what you would see if the top of the stove was transparent. I made the baffle hole in this shape thinking that it would distribute the heat more evenly. This hole should have about the same area as the chimney pipe.



    Finished door. I used a vertical sliding door because it gives a tight fit and allows adjustable ventilation low in the stove which makes for a hot and healthy fire. The door is the piece I cut out, which has a handy handle. The rails are folded from galvanized roof flashing.



    First burn, outside to burn off any zinc fumes from the chimney. Legs are made from an old folding chair.



    Stove in the tent.


    Tent with chimney.


    The stove weights 1200 g. The full rig including stove, elbow, stove pipe and legs totals 2.9 kg.
    I am very happy with this stove. It burns well, throws a lot of heat and has a very hot cook top. With the baffle it produces no chimney sparks. The pot cost about $25 CAD. They seem to last a long time and don't rust. Even the paint holds up.

    Some of the design for this stove was borrowed from Chimpac, a regular on the old WinterTrekking site. I used one of his stoves for years in this tent. It works very well, but I wanted something a little bigger (it was made from a 1 gal paint can).

    Looking forward to the snow!

    Kinguq.
    Last edited by Kinguq; 10-21-2020, 07:59 AM.
Working...
X